Hướng dẫn cài print server tp-link

     

Since Windows supports TCP/IPhường printing, it is compatible with our Print Servers, lượt thích TL-PS110U/TL-PS110P/TL-PS310U/TL-WPS510U. Here is the configuration guide.

Bạn đang xem: Hướng dẫn cài print server tp-link

Note:Before the installation, please make sure the printer works fine if it is connected khổng lồ computer directly.

Choosetheoperatingsystemofyourcomputer

*
*
*
*
*

For Windows 2000/XP

http://www.dautri.mobi/en/faq-181.html

Step 1 ClickStar->Printers & Faxes-> Printers.

Step 2 Double clichồng onAdd Printer.

Step 3 ClickNexton the Welcome screen.

Step 4 The Local or Network Printer screen will open. Select Local printer. UncheckAutomatically detect & install my Plug và Play printer.

*

Step 5 ClickNext.

Step 6 The screen of Select a Printer Port will open.Select Create a new portStandard TCP/IPhường Port.

*

Step 7 Cliông chồng Next.

Step 8 Clichồng Next again on the welcome screen.

Step 9 TheAddStandard TCP/IP Printer Portscreen will open. Enter the IP. address of the printer hệ thống. ForPort Name, it will be entered automatically.

*

Step 10 Clichồng Next.

Step 11 TheAdditionalPortInformation Requiredscreen will open. Select Custom. Clichồng Settings.

*

Step 12 TheConfigure Standard TCP/IPhường Port Monitorscreen will open.

By using Llăng xê protocol

Select LPR for Protocol. Enter lp1 in theQueue Namefield. Cliông xã on theLquảng cáo Byte Counting Enabledcheckbox (Due khổng lồ a flaw in Windows Lquảng bá, some print servers will not accept jobs unless Byte Counting is enabled).

*

By using Raw protocol

In theProtocolsection, select Raw

In thePort Numberfield, enter 9100

*

Step 13 Cliông chồng OK, then Next & Finish.

Step 14 A window will show all of the drivers, select the appropriate one.

a. In the window, select an appropriate name (Use the Queue name for clarity when making multiple printer definitions).

*

b. Keep existing driver if necessary.

*

c. In thePrint Test Pagewindow, you may kiểm tra as needed if necessary.

*

d. ClickNext.

e. ClickFinish.

For Windows 7/Vista

Situation 1

http://www.dautri.mobi/en/faq-240.html

Youneveruse the printer on your computer before but also want khổng lồ nội dung printing; you just need to lớn add a printer, follow the steps to create a Standard TCP/IPhường port, và then install the printer driver.

Step 1 ClickStart->Control Panel,và selectDevices and Printers.

*

Step 2 ClickAdd a printer.

*

Step 3 SelectAdd a local printer.

*

Step 4 SelectCreate a new port, & the type of port isStandard TCP/IPhường Port.

*

Step 5 Input theIP addressof the print server và clickNext. The windows will detect the TCP/IP Port. Please wait for the next page.

*

Step 6 SelectCustomvà clickSettings. And then on the next page, please selectLPRas the Protocol và the Queue Name islp1.

*

Step 7 It will ask you to install the driver of the printer. You can select one in the các mục or clickHave sầu Diskto lớn install other drivers. Please follow the steps khổng lồ finish the installation.

*

*

Step 8 After that, the new printer is in the menu. And you can enjoy the sharing.

*

Situation 2

http://www.dautri.mobis.com/en/faq-239.html

You ever connected directly a printer to lớn your computer by a USB cable or a parallel cable, & installed the printer driver. Now you want khổng lồ use a print hệ thống khổng lồ nói qua the printer through your network. You need to lớn change the printer port lớn Standard TCP/IP port.

Step 1 ClickStart->Control Panel -> Classic View -> Printers.

*

Step 2 Find your installed printer icon,right-cliông chồng, selectProperties.

*

Step 3 ClickPorts -> Add Port -> Standard TCP/IPhường Port -> New Port -> Next.

Xem thêm: Tài Chính Doanh Nghiệp Tiếng Anh Là Gì, Mục Tiêu Và Vai Trò

*

Step 4 Input the exactIP.. addressof print hệ thống that you configured it. ClickNext.

*

Step 5 SelectCustom, và clickSettings.

*

Step 6 ChooseLPR, và input đầu vào the queue name aslp1. ClickOK.

*

Step 7 ClickNext,Finish, to lớn complete the wizard.

*

Step 8 ClickCloseandApply.

*

Now, the printer port has been created.

For Windows 8

http://www.tp-liên kết.com/en/faq-459.html

Windows 8 is a new operating system of Microsoft, it changed greatly compared with the former versions. Since it also supports TCP/IP.. printing, it is compatible with our Print Servers, lượt thích TL-PS110U/TL-PS110P/TL-PS310U/TL-WPS510U. Here is the configuration guide.

Note:Before the installation, please make sure the printer works fine if it is connected lớn computer directly.

Step 1 Please move sầu your mouse to lớn the right corner and you will seeSearch. Cliông chồng it and searchControl Panel.

*

Step 2 Go toControl Panel->Hardware and Soundpage, and clickAdvanced printer setup.

*

Step 3

A window will pop out khổng lồ tìm kiếm the printers automatically, please ignore it & clickNextbutton.

*

Step 4 Please SelectAdd a Printer using a TCP/IP address or hostname, clickNext.

*

Step 5 Please selectCustomand clickSettings.

*

Step 6 Please type the IP. address of your Print Server inHostname or IPhường address. The print server’s IP should in same subnet with your router. As default, the Protocol is Raw. You can keep it still or select LPR. The two protocols support different printing languages. You can try one first, if can’t print, delete it & try another one.

*

Step 7 Select the correct driver for your printer. If you can’t find the Mã Sản Phẩm of your printer, please connect your printer to PC with USB cable và install the driver first. ClickNext.

*

Step 8 ClickNext.

*

Step 9 ClickFinish.

*

Until now, you have sầu finished the installation. You can find the newly added Printer onControl Panel->Hardware & Sound->Devices và Printerspage.

*

For Windows 10

http://www.dautri.mobi/en/faq-929.html

Since Windows 10 supports TCP/IPhường printing, it is compatible with our Print Servers, like TL-PS110U/TL-PS110P/TL-PS310U/TL-WPS510U. Here is the configuration guide.

Before the installation, please make sure the printer works fine if it is connected to lớn computer directly.

Step 1 Configure the print VPS as usual. Example looks below (sample is using IP. 192.168.1.147).

*

Step 2 OpenDevice & PrintersonControl Panel, or PressWindowButton, then type “Printer” then Enter.

*

Step 3 Clichồng “Add a printer”. Then it will automatically search for devices. Instead, click “The Printer that I want isn’t listed”.

*

Step 4 Then it will showAdd Printer page. Select “Add a local printer or network printer with manual settings”. Then next.

*

Step 5 On the next page, you will be asked for printer port. In this case, select “Create a new port”, và then select “Standard TCP/IP.. Port”. Then next.

*

Step 6Next page you will be asked for IP. address of your device. Put in the print server’sIP Addressand on thePort Name, add some text. For example, 192.168.1.147_X. Also rethành viên NOT lớn tick the “Query the printer & automatically select the driver to use”.

*

Step 7You then will be shown a page with Detecting TCP/IPhường. Port. Wait a few minutes depends on your network configuration. It will show you that the system cannot find any devices. Don’t worry, this is as expected. Then you will be shown the page lượt thích next page.

*

Select “Custom” then click “Settings…

Step 8Please type the IPhường address of your Print Server in Hostname or IP address. The print server’s IPhường. should in the same subnet with your router. As mặc định, the Protocol is Raw. You can keep it still or select LPR. The two protocols support different printing languages. You can try one first, if can’t print, delete it and try another one.

*

Step 9Cliông chồng Next.

*

Step 10You will be asked lớn select your printer driver. Select based on your printer mã sản phẩm & type from Windows standard drivers. Or you can use from your printer CD/DVD thiết lập kit. After that, cliông xã Next.

*

Step 11Then you will be asked whether you would lượt thích khổng lồ use current driver or replace it. This is only happen when you already have printer driver before. I assume that you have sầu installed previously. So, select khổng lồ replace.

*

Step 12Then put the name of your printer here.

*

Step 13 Cliông xã “vì not nói qua this printer”.

*

Step 14Set this printer as mặc định by ticking the selection “Set as the mặc định printer” or not. Also if you want khổng lồ vị Print test, just press the button “Print a demo page”.